15 Cleaning, Disinfection and Maintenance
56 / 80 Instruction Manual Corvis® ST (G/72100/XXXX/EN 1019 Rev01)
15.1.1 Clean the front panel
Clean head (1) and chin (4) rests
The Corvis® ST can remain switched on for this cleaning step.
During the measuring process, sweat, cosmetics, etc. from the patient can
get on the head and chin rest.
Clean these parts before examining the next patient.
Before and after each measurement wipe off the head and chin rest
with a clean cloth, for example, with gauze moistened with
rubbing alcohol.
Do not wipe more difficult spots repeatedly with a dry cloth. Instead
moisten it with rubbing alcohol.
1 Head rest 3 Lens protection glass
2 Air nozzle 4 Chin rest
Abb. 15-1: Clean lens protection glass and air nozzle
To Next Page
Loading...
