12 Perform a Measurement
38 / 80 Instruction Manual Corvis® ST (G/72100/XXXX/EN 1019 Rev01)
12.5 Saving data
Depending on the installation, your data is transferred to a computer or
laptop. You can use the patient data management for your data, sec. 14,
page 48.
Note
Loss of data due to interrupted save
If you turn off the Corvis® ST while the progress bar is still displayed, data
will be lost.
Do not turn off the power until saving is completed, e.g. when the
progress bar is complete.
If you have entered the patient data at the Corvis® ST unit itself, the
measurement is not automatically saved to a file. You can use a USB stick
for this purpose, sec. 14.5.2, page 53.
You can set the data transfer speed from the Corvis® ST to the computer/
laptop in the device settings (see User Guide).
To Next Page
Loading...
Need help?
General
