12 Perform a Measurement
Instruction Manual Corvis® ST (G/72100/XXXX/EN 1019 Rev01) 41 / 80
Select the "Target" (1) where you would like to export the data.
Recommendation: Export the patient data using the "Individual file
(U12)" option.
Press the [...] button. (2)
In the dialog that appears, select the folder or the file to which the
patient data should be exported.
Confirm your selection with [OK] or [Save].
To export the data, press the [Export] button (3).
12.7.3 Data backup
You should carry out a backup of patient and examination data at regular
intervals. In case of a loss of data, you can reconstruct the data from a
previously created backup with the help of this function. Since data
backup takes several minutes depending on the scope of the database and
the data to be backed up, a backup should be carried out when the
computer and the device will not be needed.
Note
Loss of data due to computer viruses
Computer viruses can cause loss of data.
Run a virus check before importing data from the USB flash drive.
The general rules for security backups apply to backup copies created
with the help of the Patient Data Management user interface. Storage of
backup files should always be done on a separate system (for example on
a USB flash drive with adequate capacity).
To Next Page
Loading...
