EasyManua.ls Logo

OCULUS Corvis ST - Maintenance; Attach Paper to the Chin Rest

OCULUS Corvis ST
86 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15 Cleaning, Disinfection and Maintenance
Instruction Manual Corvis® ST (G/72100/XXXX/EN 1019 Rev01) 59 / 80
Note
Equipment damage due to disinfectant solution
The disinfectant solution may damage the finish if it is sprayed directly on it.
Only spray the disinfectant solution onto a cleaning cloth, not
directly on the device
15.3 Maintenance
Germany: The operating company must ensure that the device
undergoes technical measurement testing every 2 years according to
MPBtreibV, Appendix 2 Tonometer.
To ensure that it functions correctly and safely we recommend the
following: Have the Corvis® ST checked every two years by our
service department or an authorized dealer.
15.4 Attach paper to the chin rest
If you want to attach new chin rest paper, follow these instructions:
Pull the two pins (1) out of the chin rest.
Put the chin rest paper (2) in such a way that the holes of the paper
and the chin rest (3) are aligned.
Insert the two pins (1) in the chin rest.
1 Pins 3 Chin rest
2 Chin rest paper
Abb. 15-3: Attach chin rest paper
1
3
2

Table of Contents

Related product manuals