OCULUS Corvis ST - Page 40

12 Perform a Measurement
34 / 80 Instruction Manual Corvis® ST (G/72100/XXXX/EN 1019 Rev01)
 Move the adjusting base until the patient's eye is focused on the
display.
 If necessary: Adjust the height with the buttons.
The auto-tracking function automatically looks for the trigger position.
 Proceed as described in sec. 12.3, page 37.
If the auto-tracking function is deactivated, you must make a fine
adjustment, sec. 12.2.2, page 35.
1 Auto-tracking is activated
Abb. 12-3: Settings 1
1