12 Perform a Measurement
36 / 80 Instruction Manual Corvis® ST (G/72100/XXXX/EN 1019 Rev01)
During the measurement process, you will work with the following
display:
1 Display measuringmode 3 Examinated eye
2 Camera image 4 Buttons
Abb. 12-6: Measurement procedure
Element Function
Displaying mode(1) Information about the displaying mode,
automatically active
Camera image (2) Camera image of the patient´s eye
Examinated eye (3) The examinated eye is displayed:
left (L) or right (R)
Button (4)
Measure mode, automatically enabled
Back to Patient Data Management
Adjust height
To Next Page
Loading...
