OHAUS AP310 - Parts Counting; Percent Weighing

25
OPERATION
Printing Data (Cont.)
Percent Weighing
Statistical printouts of Percent Weighing
are similar to sampling statistics. Loads
on the balance platform may be displayed
as a percentage of a defined sample. To
obtain a printout in this mode, the balance
must be set up in Percent Weighing. Refer
to basic Sampling procedure for opera-
tion. The sample illustration shown at the
right had the balance reference set to
100% using a weight of 25.22573 grams.
Parts Counting
When the balance is in a Parts Counting
mode, each time a batch of items are
counted, they can be recorded statistically
by pressing
PRINT
as described in the Sam-
pling procedure. The example shown on
the left used a five piece sample weight of
80.2273 grams.
- - - - - START - - - - -
6/22/95 10:53:24 AM
1 100.0%
2 148.9%
3 46.9%
4 70.4%
5 94.0%
- - - - - - - - - - - - - - - - - - - - -- -
SD Pop. 34.077
Mean 92.040
Sum 460.20
Max. 148.90
Min. 46.90
Diff 102.00
Finish 10:53:39 AM
Bal Id 183
ID 2000000
PR 10000
Name......................................
- - - - - - END - - - - - -
- - - - - START - - - - -
6/22/95 9:58:00 AM
1 20 Pcs
2 14 Pcs
3 11 Pcs
4 25 Pcs
5 23 Pcs
- - - - - - - - - - - - - - - - - - - - -- -
SD Pop. 5.31
Mean 18.60
Sum 93.0
Max. 25.0
Min. 11.0
Diff. 14.0
Finish 10:01:00 AM
PC Ref 0.888604 g
Bal Id 183
ID 2000000
PR 10000
Name....................................
- - - - - - - - END - - - - - -
Menu
Menu