OHAUS AP310 - Check Weighing; Fillguide TM

26
OPERATION
- - - - - START - - - - -
6/22/95 12:09:29 PM
1 5.96781 g
CW UNDER 0.00397 g
2 14.84395 g
CW OVER 2.98037 g
3 20.50947 g
CW OVER 8.64589 g
4 5.96424 g
CW UNDER 0.00753 g
5 8.93100 g
CW ACCEPT 8.93100 g
- - - - - - - - - - - - - - - - - - - - - - - -
SD Pop. 5.654601
Mean 11.243294
Sum 56.21647
Max. 20.50947
Min. 5.96424
Diff 14.54523
Finish 12:12:57 PM
Min Ref 5.97177 g
Max Ref 11.86358 g
Bal Id 183
ID 2000000
PR 10000
Name.....................................
- - - - - - END - - - - - -
- - - - - START - - - - -
6/22/95 12:09:29 PM
1 17.28667 g
Fill Dif 7.95202 g
2 31.75109 g
Fill Dif 6.51240 g
3 13.85533 g
Fill Dif 11.38335 g
4 200.0372 g
Fill Dif 174.7985 g
5 28.18002 g
Fill Dif 2.94133 g
- - - - - - - - - - - - - - - - - - - - - - - -
SD Pop. 71.216407
Mean 58.222062
Sum 291.11031
Max. 200.03720
Min. 13.85533
Diff 186.18187
Finish 1:30:25 PM
Fil Ref 25.23869 g
Bal Id 183
ID 2000000
PR 10000
Name.....................................
- - - - - - END - - - - - -
Printing Data (Cont.)
Check Weighing
When the balance is in a Check Weighing
mode, each sample can be checked to print
an under, accept or over weight on the
printout by setting the Print Options param-
eter Difference to ON. Use the procedure
described in Sampling to obtain data by
pressing
PRINT
each time a sample is
weighed.
FillGuide
TM
When the balance is in the FillGuide
TM
mode, each sample can be checked against
the defined FillGuide
TM
full capacity and to
print the difference on the printout by set-
ting the Print Options parameter Difference
to ON. Use the procedure described in
Sampling to obtain data by pressing
PRINT
each time a sample is weighed.
Menu
Menu