OHAUS AP310 - Print Menu Reset

52
MENUS
Reset
This submenu enables you to reset all Print menu selections to the factory default settings
shown below. Reset does not appear if the menu has been locked out.
Function Default
Baud Rate br2400
Data Bits 7 data
Parity none
Stop Bits 2 stop
Auto Print OFF
Auto Print interval 1 second
Non Print Low Limit 0
Non Print High Limit 0
Stable data Only OFF
Numeric Data Only OFF
Time OFF
Date OFF
1.
ON
TARE
.
2.
MODE
.
3.
ON
TARE
.
4.
ON
TARE
.
5.
MODE
or .
6.
ON
TARE
. If is selected, the balance
signals a
long beep and all selections reset to factory settings.
Communication
The Communication submenu contains submenus which permit the setting of: baud rates,
data bits, parity and stop bits necessary for communications to an external printer or
computer.
Access the
submenu under the Print menu.
^]emu cal
pR INT
ReseT
yes
yes NO
ReseT yes
co^]
Menu
Menu