36
MENUS
Setup Menu Protection
The Setup menu may be locked out to
prevent unauthorized personnel from
changing the settings. If -SAFE- is dis-
played, the Setup menu has been locked
out. Settings may be viewed but not
changed. To lock out the Setup menu, refer
to the section titled Menu Lock-Out Protec-
tion.
Reset
This submenu enables you to reset all
Setup menu selections to the factory de-
fault settings shown in the table. Reset
does not appear if the menu has been
locked out.
NOTES:
1. Default settings of the Lockswitch menu
only appear if the hardware Lock-out
switch is set to the locked position.
2. Function related options shown in itailics
in the table only appear if that function
is enabled.
SETUP MENU
FACTORY DEFAULTS
Unit Selection grams
Functions None
Statistics All-Off
Net Off
Conversion Factor
Mantissa 1.000000
Exponent 0
LSD 1
Density None
GLP Off
Animal Weighing AW1
PC Error Level OFF
Check Weighing
Reference Ref Wt.
Display Normal
Fill Options
Reference Ref Wt.
Target To Ref
Time U.S.
Date U.S.
Lockswitch Menu
Cal Yes
User No
Setup Yes
Print No
1.
ON
TARE
.
2.
MODE
.
3.
ON
TARE
.
4.
ON
TARE
.
5.
MODE
or .
6.
ON
TARE
. If is selected, the balance
signals a
long beep
.
^]emu cal
seTup
ReseT
yes
yes NO
ReseT yes
To Next Page
Loading...
