OHAUS AP310 - Print Menu Configuration; Auto Print Feature Settings

45
MENUS
Check Weighing Options (Cont.)
The following procedure describes how to set up the balance for all choices. Before starting,
the Check Weighing option must have been selected under the Functions submenu.
1. Access the
submenu under the Setup Options submenu.
2.
ON
TARE
(reference).
3.
ON
TARE
(reference weight).
4.
MODE
. If REF WT is
selected, a sample reference is used later to set the weight parameter into the balance.
If NUMBER is selected, a number representing the sample weight has to be entered
manually. See section titled Check Weighing.
5.
ON
TARE
.
6.
MODE
.
7.
ON
TARE
.
8.
MODE
, , .
9.
ON
TARE
.
10.
MODE
.
11.
ON
TARE
.
12.
MODE
.
13.
ON
TARE
.
SETUP
c_ı opT
Ref
Ref _ıT
Ref _ıT NU^]BeR
Ref
Display
NOR^]al
NOR^]al NONe si9m
Display
eND
c_ı opT
eND
opT ION5
Menu
Menu