Oki MICROLINE MX Series - E-Net Adapter Submenu

Chapter 4 HOST INTERFACE
104
E-Net Adapter Submenu
The E-Net Adapter interface allows you to locate the printer on a
LAN rather than attach the host directly into the printer. The detailed
configuration of this option is given in the
PrintNet User's Manual .
Buffer Size in K
This option configures the amount of memory allocated for the
Ethernet buffer. You can specify between 1-16 Kbytes. The default
is 16 Kbytes.
E-Net Adapter
(from page 83)
Buffer Size
in K
16*
1-16
* = Factory Default