Oki MICROLINE MX Series - Protect Configs

Optimizing Print Speed
81
Save Config.
This option allows you to save up to eight configurations to meet
different print job requirements. This eliminates the need to change
the parameter settings for each new job. The configurations are
stored in memory and will not be lost if you turn off the printer. If the
Protect Configs. parameter is enabled, the new configuration will
not be saved unless the existing configuration has been deleted
first. The factory default configuration cannot be changed. See
“Saving Your New Configuration” on page 59 for details.
Print Config.
This option is used to print a listing of various stored printer
configurations. Store printouts of your configurations in a safe place
for quick referral.
Delete Config.
You can delete one or all of your eight customized configurations.
The factory default configuration cannot be deleted.
Power-Up Config.
You can specify which of the nine configurations (Factory or 1-8)
will be the power-up configuration.
Protect Configs.
You can specify whether or not a new configuration should
overwrite an existing configuration when you activate the Save
Configs. parameter. When disabled (default), the new configuration
will overwrite the existing configuration. When enabled, the new
configuration will
not overwrite the existing configuration, and the
message “CONFIG. EXISTS / Delete First” displays.
CONFIG. CONTROL