Oki MICROLINE MX Series - Ignore Char

Chapter 4 IGP/PGL Emulation
138
Var Form Type
This menu option applies only to the host command,
CREATE;NAME or CREATE;NAME;DISK. The option also applies
to the host command CREATE;NAME followed by ;0, ;X or a form
length number that always overrides the menu option.
• Add Nothing (default). No action.
• Add; 0. When selected, the form length ends at the longest
printed element. Same as CREATE;NAME;0.
• Add; X. When selected, the form length is the same as the
physical page length.
Compressed CPI
This parameter allows you to choose a compressed character (60%
shorter) for 17 or 20 cpi instead of the normal height character.
• Disable(default). The PGL does not use compressed 17 or 20
cpi font.
• Light Font. Uses the standard compressed 17 or 20 cpi font.
• Dark Font. Uses a darker compressed 17 or 20 cpi font
compatible with the IGP-X00 printers.
Ignore Char
Ignore Mode
This parameter instructs the PGL to ignore the character selected
under the Select Character menu.
• Disable (default). The PGL does not ignore any characters.
• Enable. The PGL ignores the characters specified in the Select
Character menu.
Select Char
Instructs the PGL which decimal character (0-255) to ignore from
the host.