Chapter 4 IPDS Emulation
260
Code Page Subset
When the Thai code page is selected as the default, either from the
front panel or by a host command, you may choose from three
different versions.
Default Font
Choose a font quality and size from the available selections. All
fonts in the Default Font menu are available in standard and
compressed vertical resolution (see page 255).
VPA Check
• Enable (default). The printer checks for dots that fall outside
the intersection of the logical and physical pages. If dots fall
outside the area, the printer reports an error to the host if the
IPDS Exception Handling Control command setting requires
error reporting.
• Disable. The printer does not report dots outside the valid
printable area.
Hexdump Mode
A hex code printout (or hex dump) translates all incoming data to
hexadecimal equivalents. A hex dump lists each ASCII data
character received from the host computer, together with its
corresponding two-digit hexadecimal code. Hex dumps can be
used to troubleshoot some types of printer data reception problems.
Print IPDS Fonts
This feature allows you to print a list of all resident fonts currently
available in the active IPDS emulation
To Next Page
Loading...
Need help?
General