WLAN PARAMS
117
WLAN PARAMS
For information on assigning the IP Address, Gateway Address,
Subnet Mask, and MAC Address, refer to the
Network Interface
Card User's Manual
.
NetBIOS Protocol
This option determines whether the NetBIOS protocol will be
available. The selections are as indicated below:
• Enable (default). Makes the NetBIOS protocol available with
the ethernet installed.
• Disable. Makes the NetBIOS protocol unavailable during
printer operation.
WLAN
PARAMS
(from page 106)
* = Factory Default
ASCII
Data Port
Ethernet
Speed
9100*
1023 - 65535
Auto Select*
10 Half Duplex
10 Full Duplex
100 Half Duplex
100 Full Duplex
Keep Alive
Timer
3 Minutes*
2 - 10 Minutes
NetBIOS
Protocol
Enable*
Disable
Job Control
Standard*
Enhanced
Off
IPDS Data
Port
5001*
1023 - 65535
To Next Page
Loading...
