Chapter 4 NETWORK SETUP MENU
118
ASCII Data Port
This option sets the port number for ASCII print jobs. The data port
number needs to match your host system setting.
• 9100 (default)
• 1023 - 65535
IPDS Data Port
This option allows you to set the port number for IPDS print jobs
only if the IPDS option is installed.
The range is 1023 - 65535, and the factory default is 5001.
Keep Alive Timer
This is the time that the Keep Alive Timer will run. With the Keep
Alive Timer on, the tcp connection will stay connected even after
the print job has terminated.
• 3 Minutes (default)
• 2 - 10 Minutes
To Next Page
Loading...
