Oki MICROLINE MX Series User Manual

Changing Parameters Example
55
Changing Parameters Example
A configuration consists of several parameters. The default factory
configuration has a starting set of parameters. In the configuration
menu above, and in all the configuration menus in this chapter, the
factory default values are indicated by an asterisk (*).
Your print jobs may require parameter values which vary from the
default settings. This section provides an example procedure for
changing individual parameter values.
The following procedure shows how to change and save the
settings for the Barcode Quality and Language options. Use these
guidelines to navigate the configuration menus and change other
parameters.
. . .
OFFLINE
QUICK
SETUP
PRINTER
CONTROL
Ribbon End
Point
Open Platen
@ BOF
Barcode
Quality
Unidirectional
Tear Bar
Dist.
Display
Language
Disable*
Enable
Dark*
Draft
Disable*
Enable
7.46 in.*
(4.5-10.5 in.)
English
German
French
Italian
Spanish
Portuguese
* = Factory Default
Accented
Char
Standard*
Tall
Darker +6
Darker +5
Darker +4
Darker +3
Darker +2
Darker +1
Normal*
Lighter -1
Lighter -2
Lighter -3
Lighter -4
Lighter -5
Lighter -6
Lighter -7
Lighter -8
Lighter -9
Lighter -10

Oki MICROLINE MX Series Specifications

General

Brand	Oki
Model	MICROLINE MX Series
Category	Printer
Language	English