3270 Params
187
Translation Tbl
Prints out a table of the Coax interface’s current character set. This
operation is valid only when the TN3270 interface is the current
interface.
Active Char Set
Specifies which character language set will be the active set.
• Primary Sets (default)
• Secondary Sets
Prt Partial Line
• Enable (default). When this option is enabled, it forces the
printer to print if a partial line is in the printer (i.e. line not ending
with a LF).
• Disable. When disabled, the last partial line of data will not be
printed.
Early Print Cmpl
Early Print Complete allows the printer to send Print Complete
status to the host before the printer is actually done printing all data.
Early Print Complete is only available if the IPDS feature is
installed.
• Disable (default). Means the printer will suppress the Early
Print Complete response until all printing is complete.
• Enable. Means the printer will send an acknowledgement to
the host when it is able to accept more data.
NOTE: When an Early Print Complete is enabled and an error
occurs, the data in the printer will remain in the buffer
(regardless of the setting of the Cancel Buffer option). It is
recommended that local procedures be followed to recover
from the error.
Do not select Early Print Complete while a print job is in
progress. If this is done you will need to restart the printer.
To Next Page
Loading...
Need help?
General