Oki MICROLINE MX Series User Manual

P-Series Emulation (with LG)
219
P-Series Emulation (with LG)
Control Code 06
Control Code 06 defines the function of ASCII code hex 06 (ACK).
You can select an alternate line spacing of 6, 8, or 10.3 LPI.
Control Code 08
Control Code 08 defines the function of ASCII code hex 08 (BS).
You can define the code to output the following character:
• Elongated (default).
• Backspace.
Printer
Protocol
(from page 207)
Control Code
06
Control Code
08
Define CR
Code
Auto LF
Overstrike
Define LF
Code
P-Series
SFCC
EVFU Select Alt. Set
80-9F
Character
Set
8.0 LPI*
10.3 LPI
6.0 LPI
Elongated*
Backspace
CR = CR*
CR = CR + LF
Disable*
Enable
Enable*
Disable
LF = CR + LF*
LF = LF
1*
(0-7F hex)
Enable*
Disable
Control Code*
Printable
(see page 225)
* = Factory Default
P-Series
SFCC d
Command
Even dot plot*
Double high

Oki MICROLINE MX Series Specifications

General

Brand	Oki
Model	MICROLINE MX Series
Category	Printer
Language	English