Chapter 4 ADVANCED USER
280
PTX Setup Option
Selects the Special Function Control Code for the PTX_SETUP
command and functions.
• Setup Parse. Disables or enables the PTX_SETUP command.
• Setup SFCC. Allows you to choose the hex value of the ASCII
character you wish to use as the SFCC for the PTX_SETUP
command. Valid hex values are 01-FF. The default value is hex
21, which corresponds to the “!” character.
Hex Dump Mode
A hex code printout (or hex dump) translates all incoming data to
hexadecimal equivalents. A hex dump lists each ASCII data
character received from the host computer, together with its
corresponding two-digit hexadecimal code. Hex dumps can be
used to troubleshoot some types of printer data reception problems.
The options include:
• Disable (default)
• Enable
Figure 27 on page 313 shows a hex dump sample.
Set Lock
Key
Ribbon
Action
Stop RBN End*
Ignore RBN
End
Ink Saver
Mode
Disable*
Enable
ADVANCED USER
(Continued)
To Next Page
Loading...
