Chapter 4 IGP/PGL Emulation
134
Power On IGP/PGL
You can set the IGP feature so that it is enabled or disabled when
the printer is powered on.
• Enable (default). The PGL is enabled when the printer is
powered on. (The PGL feature is initialized in the Normal
mode.)
• Disable. The PGL is disabled when the printer is powered on.
(The PGL feature is initialized to the Quiet mode.)
Ext Execute Copy
• Disable (default). Dynamic data and overlay data are not
allowed if the optional Form Count parameter (number of forms
to print) is specified as part of the Execute command. (This
setting is IGP-100 compatible.)
• Enable. Only dynamic data is allowed within a form in which
the Form Count parameter is specified in the Execute
command. In this case, the exact same form (with identical
dynamic data, etc.) is printed for the Form Count. However,
incremental data is not incremented since the page that is
printing is exactly the same. Also, each form is printed on a
separate page.
Barcode
Options
(from page 127)
UPC
Descenders
Optimized
Ratio
I-2/5
Selection
AI 00
Spaces
Select SO
Char
Always*
Never
Only with PDF
Disable*
Enable
Leading Zero*
Trailing Space
X2 DPD
Modulo 7 CD
Disable*
Enable
14*
(0-255)
* = Factory Default
User-Def
Ratio
Enable*
Disable
To Next Page
Loading...
