IGP/PGL Submenu (with LG)
139
Compatbl. Mode
This option instructs the PGL to behave similarly to older versions
of the IGP with respect to certain commands.
All new users with new applications should select the “None”
option. Selecting this mode insures the printer will behave as
described in this manual.
When replacing an older product operating with an existing
application, especially those using the PMODE and SMODE
commands, you may need to select a compatibility mode. In this
case, select the printer model number option that most closely
matches the printer being replaced. The Compatibility Mode
options include:
• None (default)
• MVP
• L150
• P3000
• P6000
• P9000
Expanded Font
This option defines the type of expanded characters the PGL will
select:
• Scalable (default). These expanded characters have rounded
edges.
• Block. These are block characters compatible with the
IGP-X00 printers.
• Alt Block 1 / Alt Block 2. Reserved block sets used only for
compatibility purposes.
IGP/PGL Submenu
To Next Page
Loading...
