Ethernet Submenu
105
Ethernet Submenu
The Ethernet interface allows you to locate the printer on a LAN
rather than attach the host directly into the printer. The detailed
configuration of this option is given in the
Network Interface Card
User's Manual
.
Buffer Size in K
This option configures the amount of memory allocated for the
Ethernet buffer. You can specify between 1 and 16 Kbytes, in
1-Kbyte increments. The default is 16 Kbytes.
Ethernet
(from page 83)
Buffer Size
in K
16*
1-16
* = Factory Default
To Next Page
Loading...
