Chapter 4 IGP/VGL Emulation
152
SFCC & Pwrup
This option has several sub-options which define the SFCC and
power-up configuration used with VGL.
VGL SFCC
This option selects the Special Function Control Code. The default
value 5E. Run a configuration printout to determine the currently
selected VGL SFCC.
Power Up ^X
• Disable (default).
• Enable. Selects the ignore mode as the power-up default and
selects the graphics mode ^PY as the power-up default. All
characters are ignored until a ^A command is received.
Power Up ^F
• Disable (default).
• Enable. Selects free format mode as the power-up default and
selects the graphics mode ^PY as the power-up default. Free
format causes the VGL to ignore carriage returns, line feeds,
and all characters below hex 20 sent from the host.
Power Up ^PY
• Disable (default).
• Enable. Selects the graphics mode ^PY as the power-up
default.
LPI
The number of lines to be printed per inch. For example, at 6 lpi
there is 1/6 inch from the top of one print line to the top of the next
print line.
To Next Page
Loading...
