SPC Coax Params
203
SPC Space Supp
This option is only available in Coax SPC emulation and is used in
LU3/DSC/DSE mode only.
• Disable (default). Treats nulls and spaces normally.
• Enable. If the entire line consists of spaces and nulls, the line
will be discarded.
NL At MPP+1
Controls how many lines are skipped when the carriage returns to a
new line.
• On (default). Moves to the first print position two lines down
from the current position.
• Off. Moves to the first print position of the next print line.
To Next Page
Loading...
