To Next Page

To Previous Page

Epson FX Emulation

271

This option controls the action of the printer when it receives a

Carriage Return code (hex 0D) from the host computer. If this

feature is enabled, each time the printer receives a Carriage

Return, it inserts an additional Line Feed code (hex 0A) into the

data stream. Do not use this feature if the host computer sends line

feeds to the printer.

• = CR (default). Does not insert an extra line feed after each

carriage return.

• = CR + LF. If this feature is enabled, each time the printer

receives a Carriage Return, it inserts an additional Line Feed

code (hex 0A) into the data stream. (Do not use this feature if

the host computer sends Line Feeds to the printer with each

Carriage Return.)

This parameter forces the printer to insert an automatic Carriage

Return code into the data stream whenever a Line Feed code

occurs. This can be used in most installations, but it is required if

the host computer does not send carriage returns to the printer.

• = LF (default). Does not perform an automatic carriage return.

The next print position will be the current print position of the

next line.

• = CR + LF. Each time the printer receives a Line Feed, it

inserts an additional Carriage Return code (hex 0D) into the

data stream. This feature can be used in most installations, but

it is required if the host computer does not send Carriage

Returns to the printer.

LG Emulation

Oki MICROLINE MX Series User Manual

Other manuals for Oki MICROLINE MX Series