7.1
EQ / EFX
7
7 - EQ / EFX
The EQ/EFX environment contains a wide range of processors for processing the signals of the respective
sections of OkyWeb2. In fact, each section has its own set of dedicated processors:
- MIC section (microphone) : 4-band parametric Equalizer, Reverb, Echo with SYNCtoMIDI.
- MUSIC section (backing track) : 4-band parametric Equalizer, Reverb, Chorus.
Each processor has been designed to obtain the maximum sound results with the utmost user-friendliness.
Controls can be easily handled even during live performances.
Each processor has an initial library of Presets, already optimised for a wide range of applications.
By means of the PC software supplied, you can prepare your own Presets and add them to the Preset library
saved on the Compact Flash card.
The Presets and any changes made to them can be saved directly in the individual songs. You can thus save
the effects for both backing track and vocals, even in backing tracks that don’t normally have dedicated tracks
(e.g. MIDI Files and MF3), thus creating a truly customized archive.
N.B.: as well as 32 tracks dedicated to the backing track, songs in MF5 format also contain tracks reserved for the EQ/EFX processors.
Each individual song in this format can therefore contain dynamic changes for each Effect and each Equalizer, exactly as normally happens
with the instruments of the backing track.
For example: you can have a song in which your voice is processed in the verses with a short Echo, in the refrain with a long Echo and in the
bridge with a “megaphone-style” Equalization and a very long Reverb, followed by a song with a bass and treble boosting equalization and
completely different vocal effects. All this is done completely automatically, without moving a finger...
How to edit a processor
Press the EQ/EFX key
According to the song’s playing conditions, the EQ/EFX environment shows pages with or without the song’s
lyrics. Only the appearance changes: Editing procedure however remains unchanged.
Press EQ/EFX
repeatedly to select the required processor.
To move the cursor to the required parameter, use the UP and DOWN keys
To change the value of the selected parameter, use the - and + keys
For example: to change the Preset of the equalization used on your voice, press the EQ/EFX key repeatedly until the MIC EQ pages appears,
then use the UP and DOWN keys to move the cursor to the MIC EQ PRESET parameter and, lastly, use the - and + keys to scroll through the
Preset list until the required preset is reached. The Preset is immediately enabled.
Feel-Robbie Williams
I JUST WANT TO FEEL
REAL LOVE IN THE HOME THAT
I LIVE IN
MIC REVERB
→MIC REV PRESET: Medium Hall
MIC REV TIME : 085
MIC REV SEND : 074
SELECT REVERB PRESET
MIC REVERB
→MIC REV PRESET: Medium Hall
MIC REV TIME : 085
MIC REV SEND : 074
SELECT REVERB PRESET
To Next Page
Loading...