5-26
Operation on the Machine > Sending Document to Desired Shared Folder on a Computer (Scan to PC)
5
Check the status.
1 Check the information.
Change the delay as required.
2 Select [Connection Test] to check the connection.
"Connected." appears when connection to the destination is correctly established. If
"Cannot connect." appears, review the entry.
To enter multiple destinations, select [Next Destination] and enter the next destination.
You can specify a combine total of up to 10 SMB and FTP destination folders.
You can register the entered information in the Address Book by selecting [Add to
Address Book].
6
Select [OK].
Destinations can be changed later.
7
Select the functions.
Select tabs to display other functions.
8
Press the [Start] key.
Sending starts.
If [Prohibit] is set to “Broadcast”, multiple destinations cannot be entered.
Broadcast (page 8-37)
Confirmation Screen of Destinations (page 5-48)
Send (page 6-5)
To Next Page