9-35
User Authentication and Accounting (User Login, Job Accounting) > Enabling Job Accounting
Job Accounting Access
1
Display the screen.
1 [System Menu/Counter] key > [User Login/Job Accounting]
2 [Job Accounting Settings] > [Job Accounting Access]
2
Configure the settings.
[Local] or [Network] > [OK]
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login as an administrator or as a
user with privileges to carry out this setting.
The factory default login user name and login password are set as shown below.
To select [Network], network authentication must be enabled and [Ext.] must be selected
for server type.
Enabling User Login Administration (page 9-3)
Model Name Login User Name Login Password
d-COPIA 5001MF
d-COPIA 6001MF
To Next Page
Loading...
