2-16
Installing and Setting up the Machine > Touch Panel
Assigning Functions to Function Keys
Function keys are keys to which various functions and applications, including copy and scan, can be assigned.
Frequently used functions and applications can be assigned and the screen can easily be displayed.
For this machine, the following functions are pre-assigned; however, alternative functions can be registered by
re-assigning these functions.
•[F1] (Function key 1): Copy
•[F2] (Function key 2): Send
•[F3] (Function key 3): FAX (Option)
1
Display the screen.
[System Menu/Counter] key > [Common Settings] > [Function Key Assignment]
2
Configure the settings.
1 Select [Change] to enable the function key to be set.
2 Select the function to be assigned.
If user login administration is enabled, you can only change the settings by logging in with
administrator privileges or as a user with privileges to configure this setting. The factory
default login user name and login password are set as shown below.
Function Description Reference page
None No function has been assigned. —
Copy Displays the Copy screen. page 5-18
Send Displays the Send screen. page 5-22
FAX Server Displays the FAX Server screen. page 5-40
FAX
*1
Displays the FAX screen. Refer to the FAX
Operation
Guide.
Custom Box Displays the Custom Box screen. page 5-56
Job Box Displays the Job Box screen. page 4-18
USB Drive Displays the USB Drive screen. page 5-68
FAX Box
*1
Displays the FAX Box screen. Refer to the FAX
Operation
Guide.
FAX Memory RX
Box
*1
Displays the FAX Memory RX Box screen. Refer to the FAX
Operation
Guide.
Model Name Login User Name Login Password
d-COPIA 5001MF
d-COPIA 6001MF
To Next Page
Loading...
Need help?
General
