Olivetti d-COPIA5001MF - Checking and Editing Destinations

5-47
Operation on the Machine > Handling Destination
Checking and Editing Destinations
1
Display the screen.
Specify the destination.
2
Check and edit the destination.
Select a destination and select [Detail/Edit] to check it. The entered addresses can be edited
if they have been specified.
Select a destination and select [Delete] to remove the destination from the list.
Specifying Destination (page 5-43)
NOTE
• When selecting [On] for Entry Check for New Destination, the confirmation screen
appears. Enter the same destination again, and select [OK].
Entry Check for New Dest.
(page 8-36)
• When selecting [On] for Destination Check before Send, the confirmation screen appears
after pressing the [Start] key.
Dest. Check before Send
(page 8-36)
Confirmation Screen of Destinations (page 5-48)