5-43
Operation on the Machine > Handling Destination
Handling Destination
This section explains how to select and confirm the destination.
Specifying Destination
Select the destination using either of the following methods except entering address directly:
• Choosing from the Address Book
• Choosing from the External Address Book
For details on the External Address Book, refer to the following:
• Choosing from One Touch key
• Choosing from the Speed Dial
• Choosing from the Destination History
• Choosing from the FAX
Choosing from the Address Book
For more information about how to register destinations in the Address Book, refer to the following:
Registering Destinations in the Address Book (page 3-35)
1
In the basic screen for sending, select [Address Book].
2
Select the destinations.
Select the checkbox to select the desired destination from the list. The selected destinations
are indicated by a checkmark in the check box. To use an address book on the LDAP server,
select "Addr Book" [Ext Address Book].
Choosing from the Address Book (page 5-43)
Embedded Web Server RX User Guide
Choosing from the One Touch Key (page 5-45)
Choosing from the Speed Dial (page 5-45)
Choosing from the Destination History (page 5-46)
FAX Operation Guide
• You can set the machine up so that the address book screen appears when you select the [Send] key.
Default Screen
(page 8-36)
• If you are using the products equipped with the fax function, you can specify the fax destination. Enter the other
party number using the numeric keypad.
For details on the External Address Book, refer to the following:
Embedded Web Server RX User Guide
To Next Page
Loading...
Need help?
General
