5-64
Operation on the Machine > Using Document Boxes
Copying Documents in Custom Box to USB Drive
1
Display the screen.
[Home] ( ) key > [Custom Box] > Select the box > [Open]
2
Copy the documents.
1 Select the document in the list that you want to copy by selecting the checkbox.
The document is marked with a checkmark.
2 [Move/Copy] > [Copy to USB Drive] > [Next] > select the destination of copy > [Next] >
[Copy] > [OK]
The selected document is copied.
Joining Documents in Custom Box
You can join documents within a custom box into one file.
1
Display the screen.
[Home] ( ) key > [Custom Box] > Select the box > [Open]
2
Join the document.
1 Select the documents in the list that you wish to join by selecting the checkbox.
The document is marked with a checkmark.
You can join up to 10 documents.
2 Select [Join].
3 Arrange the documents into the order in which they are to be joined.
Highlight the document you want to rearrange and select [Up] or [Down] to move it to the
correct place in the sequence.
If a custom box is protected by a password, enter the correct password.
To deselect, select the checkbox again and remove the checkmark.
You can only join a document to other documents in the same custom box. If necessary, move the documents to be
joined beforehand.
If a custom box is protected by a password, enter the correct password.
To deselect, select the checkbox again and remove the checkmark.
To Next Page