9-22
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
Guest Authorization Set.
When User Login Administration is enabled, set the functions that guest users who cannot log in to the machine are
allowed to use.
Enabling Guest Authorization
1
Display the screen.
1 [System Menu/Counter] key > [User Login/Job Accounting]
2 "User Login Setting" [Next] > "Guest Authorization Set." [Next] >
"Guest Authorization" [Change]
2
[On] > [OK]
• To use Guest Authorization Set., User Login Administration must be enabled in "Enabling User Login
Administration".
Enabling User Login Administration
(page 9-3)
• Cannot be used when the Key Counter option is used.
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login as an administrator or as a
user with privileges to carry out this setting.
The factory default login user name and login password are set as shown below.
If the guest authorization setting is enabled, the [Authentication/Logout] key must be
selected when logging in.
In the guest user default settings, only monochrome copying can be used. If you wish to use
a different function, log in as a user who can use that function, or change the settings in the
guest properties.
Model Name Login User Name Login Password
d-COPIA 5001MF
d-COPIA 6001MF
To Next Page
Loading...
