6-20
Using Various Functions > Functions
*5 For instructions on how to specify the custom paper size, refer to the following:
Custom Paper Size
(page 8-12)
*6 The input units can be changed in System Menu. For details, refer to the following:
Measurement
(page 8-15)
*7 For instructions on how to specify the custom paper types 1 to 8, refer to the following:
Media Type Setting
(page 8-15)
To print on preprinted or prepunched paper or on letterhead, refer to the following:
Special Paper Action
(page 8-14)
When paper size and the media type for MP tray is specified, [Paper Settings] is selected. Note that if [MP
Tray] is pressed at this point, the settings will be canceled.
• You can conveniently select in advance the size and type of paper that will be used often and set them as default.
MP Tray Setting
(page 8-8)
• If the specified size of paper is not loaded in the paper source cassette or multipurpose tray, a confirmation screen
appears. When [Auto] is selected and the same size of paper as the detected original size is not loaded, a paper
confirmation screen appears. Load the required paper in the multipurpose tray and press [Continue] to start
copying.
To Next Page