Olivetti d-COPIA5001MF - Page 447

8-62
Setup and Registration (System Menu) > System Menu
VNC (RFB) This is set when starting up a VNC Viewer (E.g. RealVNC) to use the Remote
Operation.
*1
The default port number is 9062.
Value: Off, On
Wi-Fi Direct Set whether to enable this function for each network.
Value: Disable, Enable
Wi-Fi
Wired Network
VNC (RFB) over SSL This is set when starting up a VNC Viewer (E.g. RealVNC) to use Remote Operation
protected by SSL.
*1, *2
The default port number is 9063.
Value: Off, On
NOTE
When selecting [On], it also requires a certificate for SSL. The default certificate is the
self-certificate of the machine.
Wi-Fi Direct Set whether to enable this function for each network.
Value: Disable, Enable
Wi-Fi
Wired Network
Enhanced VNC over SSL
This is set when starting up Embedded Web Server RX to use Remote Operation
pr
otected by SSL.
*1, *2
The default port number is 9061.
Value: Off, On
NOTE
• The default setting is [On].
• When selecting [On], it also requires a certificate for SSL. The default certificate is
the self-certificate of the machine.
Wi-Fi Direct Set whether to enable this function for each network.
Value: Disable, Enable
Wi-Fi
Wired Network
REST Select whether to communicate using REST.
*1
Value: Off, On
Wi-Fi Direct Set whether to enable this function for each network.
Value: Disable, Enable
Wi-Fi
Wired Network
Item Description