DP23-AOU/DP28-AOU
99
Hand switch for exposure U-HSEXP
U-HSEXP can be attached to the microscope by connecting U-HSEXP to U-CBS with the cable. With this operation,
you can acquire images while operating the microscope.
U-HSEXP works same as the [Snapshot] button in the [Acquisition] tab. Pressing the switch U-HSEXP allows you to
acquire and save the images.
· For procedures to connect U-HSEXP to U-CBS, see p.96.
· For procedure to attach U-HSEXP to the microscope, see p.97.
· You cannot record movies with U-HSEXP. Use the [Movie] button in the [Acquisition] tab. (p.39)
To Next Page
Loading...
