42
5
Selecting the objective magnification
Select the [Acquisition] tab
A
.
If the setting items of [Microscope] are not displayed, press
B
to
open them.
Press the button in [Objectives]
C
to select the magnification of the
objective currently in the light path. (If the objective magnification is
linked with the microscope, you do not need to select the magnification.
The objective magnification is set automatically according to the
selected objective.) For details, see,"8 Functions linked with microscope
(p.95)".
The buttons in [Objectives]
C
can be set according to the
microscope you use. For setting procedures, see "Setting the
microscope (p.84)".
1
2
3
C
B
A
To Next Page
Loading...
