Olympus OmniScan MX - Table 22 Omniscan MX Alarms

DMTA-20015-01EN [U8778402], Rev. M, February 2017
Specifications 115
I/O lines
Encoder 2-axis encoder line (quadrature or
clock/direction)
Digital input 2 digital inputs TTL, 5 V
Digital output 4 digital outputs TTL, 5 V, 15 mA maximum
per output
Remote communication Remote communication RS-232 or RS-485
Acquisition on/off switch Remote acquisition enable TTL, 5 V
Power output line 5 V nominal, 500 mA nominal power
output line (short-circuit protected)
Alarms 3 TTL, 5 V, 15 mA maximum.
Analog output 2 analog outputs (12-bit resolution) ±5 V
nominal in 10 kΩ, 10 mA maximum per
output
Pace input 5 V, TTL pace input
Table 22 OmniScan MX alarms
Alarms
Number of alarm zones 3
Conditions Any logical combination of gates
Analog outputs 2
Table 21 OmniScan MX general specifications (continued)