Olympus OmniScan MX - 4 CH Connector References; Figure M-6 the 4 CH Connector; Table 65 Pinout for the 4 CH Connector [OMNI-M-ECA4-32 Module]

DMTA-20015-01EN [U8778402], Rev. M, February 2017
OMNI-M-ECA4-32 Module Specifications 183
M.4 4CH Connector References
Description
19-pin connector
Manufacturer, number
Fischer, 1031-A019-130
Figure M-6 The 4CH connector
Table 65 Pinout for the 4CH connector [OMNI-M-ECA4-32 module]
Pin Signal Description Current
1PROBEDATA_PProbe ID Data
2 GEN50_1 Main generator 50/100 Ω Termination #1
3 HSWAP1 Automatic probe detection
4ANGDGround
5ANGDGround
6ANGDGround
7 GEN50_2 Main generator 50/100 Ω Termination #2
8 GEN0° Main generator #1 direct output
9 GEN180° Main generator #2 direct output