Olympus OmniScan MX - Table 27 Omniscan MX2 Software Compatibility; DMTA-20015-01 EN [U8778402], Rev. M, February

DMTA-20015-01EN [U8778402], Rev. M, February 2017
Appendix A 126
The software versions mentioned in Table 27 on page 126 and Table 28 on page 127
were the versions available at the time of the publication. Subsequent qualified
versions will also be compatible.
OMNI-M2-PA32128 U8100123 Yes No
OMNI-M2-PA32128PR U8100145 Yes No
OMNI-M2-UT-2C U8100131 Yes No
Table 27 OmniScan MX2 software compatibility
Module Acquisition Analysis
UT
MXU 3.1R3
a
TomoView 2.10R5 with OSTV 3.0
a. Not compatible with version later than 3.1.
OmniPC 3.1R3
a
TomoView 2.10R5
PA
MXU 4.1
b
TomoView 2.10R5 with OSTV 3.0
b. MXU 3.2 and OmniPC 3.2 are also compatible.
OmniPC 4.1
b
TomoView 2.10R5
UT2 MXU 4.1
OmniPC 4.1
b
TomoView 2.10R5
PA2
MXU 4.1
b
OmniPC 4.1
b
TomoView 2.10R5
Table 26 Module compatibility (continued)
Module Model Part Number OMNI-MX2 OMNI-MX
IMPORTANT