DMTA-20015-01EN [U8778402], Rev. M, February 2017
Appendix N
188
This appendix lists the technical specifications for OmniScan PA acquisition module
models OMNI-M2-PA1664, OMNI-M2-PA16128, OMNI-M2-PA32128 and OMNI-M2-
PA32128PR (see Figure N-2 on page 188).
Figure N-2 Phased array module model OMNI-M2-PA1664/16128/32128/32128PR
By default, these acquisition modules come with an anchor base (see Figure N-3 on
page 188), which allows the usage of EZ Latch probe connectors.
Figure N-3 Module with anchor base
A PA connector cap is attached to the anchor base (see Figure N-4 on page 189). When
the UT channel is the only channel used, place this cap over the PA connector to
protect it against dirt and water.
To Next Page
Loading...
