OmniCell G4 - Remove the Omnirx Sled

5-12 OmniRX G4 Service Guide
Introduction
OmniRx Service Guide/67-2023 Rev F © 2011 Omnicell, Inc.
4. Remove the paper tray from the OmniRx.
Figure 5-18. Remove the paper tray
Remove the OmniRx Sled
1. Remove the screw in the printer bay that secures the OmniRx sled to the frame.
Figure 5-19. Remove the screw that secures the sled to the Rx frame