Omron 3F88L-160 - Page 73

3-17
Classifi-
cation
Refer-
ence
Function levelContentsFunctionClassifi-
cation
Refer-
ence
2
(All
func-
tions)
1
(Basic
opera-
tion/
monitor
only)
0
(Moni-
tor
only)
ContentsFunction
Applied
functions
Origin compensation value
setting
Sets the
compensation value
to match the
mechanical origin to
the Cam Positioner
origin.
Note The compensa-
tion value is
shared by the
origin shift op-
eration and the
origin com-
pensation op-
eration.
Note The origin com-
pensation op-
eration is pos-
sible even with
the basic func-
tions (function
levels 0 and 1).
No No Yes
3-6-4
Origin shift (operation) When the TRIG input
is turned ON in RUN
mode, the present
Resolver angle at that
time is changed to 0
or to the origin
compensation value.
Yes Yes Yes
Backlash compensation
value setting
Sets a value
equivalent to the
mechanical
looseness.
No No Yes
3-6-5
Enable/disable backlash
compensation setting
Enables/disables the
backlash
compensation value.
No No Yes
Backlash compensation When the backlash
compensation value is
enabled, provides
cam outputs in
conformance with the
mechanical
looseness.
Yes Yes Yes
Operation Chapter 3