3-27
H Cam Program Creation (PRGM Mode)
Before creating cam programs, use the information contained in 7-7 Cam Programming
Sheet to write down the ON/OFF patterns so as to make the process easier.
D Time Chart
The following shows how to create a cam program with the following kind of ON/OFF patterns.
The resolution is set to 360 (divisions/rotation) in this example. (When the resolution is set to 720, the
ON and OFF angle values will be double the values shown here.)
Bank No. 2
Time chart
OFF
position
ON
position
Cam
No.
D Display and Operation Functions in PRGM Mode
Display Functions
Function name Display
Bank/Function display Displays the bank numbers currently being programmed.
Cam/Parameter No. display Displays the cam numbers currently being programmed.
SPEED/ON angle display Displays ON angles or errors.
POSITION/OFF angle display Displays OFF angles.
Operation Chapter 3
To Next Page
Loading...
