500
LCD Option Board Function Section 8-6
8-6-10 Timer Switch
There are 3 kinds of timer, including Day, Weekly and Calendar Timer.
It is possible to register up to 16 timers for each kind.
Setting Day Timer
Example 8:30 to 17:15 from Monday to Friday, control bit W509.15 is ON.
1,2,3...
1. Switch to the Setup Mode.
2. Press the Down button to select Timer.
3. Press the OK button to enter the Timer Switch menu.
4. Press the OK button to enter the Day Timer Screen.
The final digit of the Timer No. will be flashing.
The following table shows the setting items.
5. Use the Up button to change the Timer No. to 16.
The following table shows the relation between the Timer No. and the con-
trol bit when the word address is W001.
Type Description
Day timer Sometime in a day, set the related control bit to ON.
Weekly timer Sometime in a week, set the related control bit to ON.
Calendar timer Sometime in a year, set the related control bit to ON.
a
b
c
d
ef
No. Description
a Timer flag
b Timer No. (01 to 16)
c ON time of PLC
d OFF time of PLC
e Word type
f Word address
Timer No. Control bit
01 W001.00
02 W001.01
03 W001.02
04 W001.03
……
16 W001.15
To Next Page
Loading...
Need help?
General
