502
LCD Option Board Function Section 8-6
13. Use the Forward button to move the column cursor to the position of
word address.
The present setting is the default address.
14. Move the column cursor to the digit to be set.
Use the Up button to change the word address to 509.
15. Press the OK button to save the setting.
16. Press the ESC or OK button to return to the Day Timer Screen.
Setting Calendar Timer
Example From 1
st
June to 1
st
October, control bit H209.05 is ON.
1,2,3...
1. Switch to the Setup Mode.
2. Press the Down button to select Timer.
3. Press the OK button to enter the Timer menu.
4. Press the Down button to select Cal Timer.
To Next Page
Loading...
Need help?
General
