33
Connecting Programming Devices Section 1-3
Checking after Installation
1,2,3... 1. Display the Device Manager at the computer.
2. Click USB (Universal Serial Bus) Controller, and confirm that OMRON
SYSMAC PLC Device is displayed.
Re-installing the USB
Driver
If the USB driver installation fails for some reason or is cancelled in progress,
the USB driver must be reinstalled.
Checking USB Driver Status
1,2,3... 1. Display the Device Manager on the computer.
2. If USB Device is displayed for Other devices, it means that the USB driver
installation has failed.
To Next Page
Loading...
