Omron CP1H CPU User Manual

717
PLC Setup Appendix G
Serial Port 1 Settings
Serial Communications Settings
Name Default Settings When setting is read
by CPU Unit
Internal
address
Bits Settings
1 Communications Settings Standard
(9600; 1,7,2,E)
Standard (9600; 1,7,2,E)
(The standard settings
are as follows: 9,600
baud, 1 start bit, 7-bit
data, even parity, and 2
stop bits.)
Every cycle 144 15 0
Custom 1
2 Mode Host Link Host Link Every cycle 144 08 to
11
0 hex
5 hex
NT Link (1:N) 2 hex
RS-232C 3 hex
ToolBus (peripheral bus) 4 hex
Serial Gateway 9 hex
PC Link (Slave) 7 hex
PC Link (Master) 8 hex
2-1 Host Link
2-1-1 Baud 9,600 bps 300 bps Every cycle 145 00 to
07
01 hex
600 bps 02 hex
1,200 bps 03 hex
2,400 bps 04 hex
4,800 bps 05 hex
9,600 bps 00 or
06 hex
19,200 bps 07 hex
38,400 bps 08 hex
57,600 bps 09 hex
115,200 bps 0A hex
2-1-2 Format
(data
length,
stop bits,
parity)
7,2,E: 7-bit
data, 2 stop
bits, even parity
7,2,E: 7-bit data, 2 stop
bits, even parity
Every cycle 144 00 to
03
0 hex
7,2,O: 7-bit data, 2 stop
bits, odd parity
1 hex
7,2,N: 7-bit data, 2 stop
bits, no parity
2 hex
7,1,E: 7-bit data, 2 stop
bits, even parity
4 hex
7,1,O: 7-bit data, 1 stop
bit, odd parity
5 hex
7,1,N: 7-bit data, 1 stop
bit, no parity
6 hex
8,2,E: 8-bit data, 2 stop
bits, even parity
8 hex
8,2,O: 8-bit data, 2 stop
bits, odd parity
9 hex
8,2,N: 8-bit data, 2 stop
bits, no parity
A hex
8,1,E: 8-bit data, 1 stop
bit, even parity
C hex
8,1,O: 8-bit data, 1 stop
bit, odd parity
D hex
8,1,N: 8-bit data, 1 stop
bit, no parity
E hex
2-1-3 Unit Num-
ber
0 0 Every cycle 147 00 to
07
00 hex
: :
31 1F hex

Omron CP1H CPU Specifications

General

Brand	Omron
Model	CP1H CPU
Category	Computer Hardware
Language	English